French Fries Deep Fryer Machine

1.At the bottom corners of the equipment, there are movable steering wheels, which facilitate the movement of the equipment. At the four corners, there are adjustable height floor-standing feet. Before using the equipment, it is necessary to ensure that it is stable and adjust the floor-standing feet properly, only then can it be used for deep-frying. Remove the protective film on the surface.

2. Connect the power supply of the deep fryer according to the schematic diagram.

3. Before the shell is put into operation, it needs to be grounded.

4. When starting to use, make sure to clean the inside of the pot thoroughly, drain the waste water completely, then close the valve, and add oil to the pot. The frying pot is equipped with stirring teeth, which are used to stir the contents inside the pot.

5. Add the cooking oil as per the instructions. The height of the oil surface should be at least 30mm below the heating tube.

6. Switch on the main power supply, turn on the electric heating knob, and the power indicator light will turn green.

7. The stop switch is a red button.

8. After the frying process is completed, press the discharge switch (the discharge activation button is green). The frying basket will slowly rise and the fried products can be poured into the containers that have been prepared in advance.

9. The equipment operates at a voltage of 380 volts and is heated by electric heating elements.

10. After the work is completed, the oil temperature must be lowered to below 20 degrees before opening the oil drain valve to release the oil in the deep fryer, to prevent the excessively high temperature from causing burns to personnel.