Dumpling Wrapper Making Machine

The working principle is that the coarse pressure roller first presses the noodle billet into noodle sheet, and then sends the noodle sheet to the calendering roller by the conveyor device for thinning and calendering, and then the mold will make the pressed noodle sheet into dumpling skin at one time, and the thickness of the skin can be changed by adjusting the gap of the roller through the hand wheel, which should be adjusted according to the demand, and then it can be used normally.

In addition to the production of dumpling skin, the machine can also be used for processing wonton skin, wet noodles, etc., a multi-purpose machine, no edges, one can operate.

When using the dumpling skin machine, sometimes there will be the case of running out of the skin, it is caused by the lateral clearance of the pair of rollers is not the same, you can adjust the handwheel on both sides of the rollers to solve the problem of running out of the skin.

Adjustment method: the skin to which side of the bias, it is appropriate to loosen which side of the handwheel, or tighten the opposite direction of the handwheel, the gap between the two ends of the rollers are consistent, then there will be no deviation of the situation.